Important note: Spray units must not be operated while the pump is pulsating/cycling
because it can cause premature component failure.
•
Chemical solution may now be added to the tank.
•
Follow the mixing instructions and safety precautions provided by the chemical
manufacturer. Before adding concentrated chemicals, partially fill the tank with water
then add the chemical and complete filling with water.
•
Wear all the safety equipment recommended by the chemical manufacturer before
adding chemical to the sprayer and whilst conducting spraying operations.
After spraying is completed, drain unused chemicals from the tank. Rinse the tank with
clean water then operate the sprayer with clean water in the tank to clean out the pump,
hose, and spray lance. Do not leave chemicals in the tank as they may crystallize or form
solids in the pump, spray lines and block the filter.
If heavy frosts are experienced, run the sprayer until the pump and spray lines are dry. This
will prevent water freezing in the pump or spray lines and damaging the sprayer.
Warning!
Dispose of unused chemical and water used for rinsing in a manner that will not
endanger people, animals, or the environment in accordance with local
regulations and the handling and disposal information available from the
Chemical manufacturer.
Operation (12V Version, cont.)
