Siliken Atakama ATK-P60, Инструкция по эксплуатации

Страница: 18 / 34

Warnings and electrical hazards
17
!
electrical failure or if the service life of the module ends due to any cause
in general, please contact Siliken to appropriately eliminate and/or recycle
the product according to American/European norms.
Consult the fire security regulations, norms and prerequisites for buildings
and structures with your local authorities. Keep in mind that a roof-top
construction and installation may affect the building’s fire security; erroneous
installation of PV modules can increase this risk in case of fire. The
assembly is to be mounted over a fire resistant roof covering rated for
the application.
The modules are qualified for application class A: Hazardous voltage
(IEC 61730: higher than 50V DC; EN 61730: higher than 120V), hazardous
power applications (higher than 240W) where general contact access
is anticipated (Modules qualified for safety through EN IEC 61730-1 and
-2 within this application class are considered to meet the requirements
for Safety Class II.
WARNING: Failure to comply with the provisions of this section
will lead to the loss of guarantee and the exoneration of Siliken
from any type of responsibility for damage to property or injury to
people.