Siliken Atakama ATK-P60, Инструкция по эксплуатации

Страница: 15 / 34

Warnings and electrical hazards
14
The installation, handling and maintenance of the photovoltaic modules
must be carried out by qualified personnel duly equipped with individual
protections.
For information purposes, these protections include: safety boots with
insulation for above 1000V, gloves with 1000V insulation, as well as a
helmet and appropriate clothes.
Contact with VAC (VDC) voltage equal or higher than 30 V is potentially
dangerous. Do not use PV modules with different electrical or physical
configurations in a single PV system. Keep children away from the system
and the PV modules during installation. Do not carry out the installation
in heavy rain or wind.
For handling electrical components, always use appropriate tools covered
with insulating materials. It is recommended to avoid handling modules
in humid conditions. Before handling and installing PV modules, remove
your rings and other metal jewels.
It is important to remember that the active front panel of the module is
made of glass and can break if it receives an impact. In cases of broken
glass, the module must not be installed as it will have lost the electrical
insulation of the cells and will have a much lower performance level.