manualshive.com logo in svg

Silicon Laboratories MGM13S Series, Руководство пользователя, Страница: 11 / 125

Поделиться
Скачать
Silicon Laboratories MGM13S Series Скачать руководство пользователя страница 11

3.5.2  Internal Oscillators and Crystal

The MGM13S fully integrates two crystal oscillators, four RC oscillators, and a 38.4 MHz crystal.

• The high-frequency crystal oscillator (HFXO) and integrated 38.4 MHz crystal provide a precise timing reference for the MCU and

radio.

• The low-frequency crystal oscillator (LFXO) provides an accurate timing reference for low energy modes and the real-time-clock cir-

cuits.

• An integrated high frequency RC oscillator (HFRCO) is available for the MCU system, when crystal accuracy is not required. The

HFRCO employs fast startup at minimal energy consumption combined with a wide frequency range.

• An integrated auxilliary high frequency RC oscillator (AUXHFRCO) is available for timing the general-purpose ADC and the Serial

Wire Viewer port with a wide frequency range.

• An integrated low frequency 32.768 kHz RC oscillator (LFRCO) for low power operation where high accuracy is not required.
• An integrated ultra-low frequency 1 kHz RC oscillator (ULFRCO) is available to provide a timing reference at the lowest energy con-

sumption in low energy modes.

3.6  Counters/Timers and PWM

3.6.1  Timer/Counter (TIMER)

TIMER peripherals keep track of timing, count events, generate PWM outputs and trigger timed actions in other peripherals through the
PRS system. The core of each TIMER is a 16-bit counter with up to 4 compare/capture channels. Each channel is configurable in one
of three modes. In capture mode, the counter state is stored in a buffer at a selected input event. In compare mode, the channel output
reflects the comparison of the counter to a programmed threshold value. In PWM mode, the TIMER supports generation of pulse-width
modulation  (PWM)  outputs  of  arbitrary  waveforms  defined  by  the  sequence  of  values  written  to  the  compare  registers,  with  optional
dead-time insertion available in timer unit TIMER_0 only.

3.6.2  Wide Timer/Counter (WTIMER)

WTIMER peripherals function just as TIMER peripherals, but are 32 bits wide. They keep track of timing, count events, generate PWM
outputs and trigger timed actions in other peripherals through the PRS system. The core of each WTIMER is a 32-bit counter with up to
4  compare/capture  channels.  Each  channel  is  configurable  in  one  of  three  modes.  In  capture  mode,  the  counter  state  is  stored  in  a
buffer at a selected input event. In compare mode, the channel output reflects the comparison of the counter to a programmed thresh-
old value. In PWM mode, the WTIMER supports generation of pulse-width modulation (PWM) outputs of arbitrary waveforms defined by
the sequence of values written to the compare registers, with optional dead-time insertion available in timer unit WTIMER_0 only.

3.6.3  Real Time Counter and Calendar (RTCC)

The  Real  Time  Counter  and  Calendar  (RTCC)  is  a  32-bit  counter  providing  timekeeping  in  all  energy  modes.  The  RTCC  includes  a
Binary Coded Decimal (BCD) calendar mode for easy time and date keeping. The RTCC can be clocked by any of the on-board oscilla-
tors with the exception of the AUXHFRCO, and it is capable of providing system wake-up at user defined instances. When receiving
frames, the RTCC value can be used for timestamping. The RTCC includes 128 bytes of general purpose data retention, allowing easy
and convenient data storage in all energy modes down to EM4H.

A secondary RTC is used by the RF protocol stack for event scheduling, leaving the primary RTCC block available exclusively for appli-
cation software.

3.6.4  Low Energy Timer (LETIMER)

The unique LETIMER is a 16-bit timer that is available in energy mode EM2 Deep Sleep in addition to EM1 Sleep and EM0 Active. This
allows it to be used for timing and output generation when most of the device is powered down, allowing simple tasks to be performed
while the power consumption of the system is kept at an absolute minimum. The LETIMER can be used to output a variety of wave-
forms with minimal software intervention. The LETIMER is connected to the Real Time Counter and Calendar (RTCC), and can be con-
figured to start counting on compare matches from the RTCC.

3.6.5  Ultra Low Power Wake-up Timer (CRYOTIMER)

The CRYOTIMER is a 32-bit counter that is capable of running in all energy modes. It can be clocked by either the 32.768 kHz crystal
oscillator (LFXO), the 32.768 kHz RC oscillator (LFRCO), or the 1 kHz RC oscillator (ULFRCO). It can provide periodic Wakeup events
and PRS signals which can be used to wake up peripherals from any energy mode. The CRYOTIMER provides a wide range of inter-
rupt periods, facilitating flexible ultra-low energy operation.

MGM13S Mighty Gecko SiP Module Data Sheet

System Overview

silabs.com

 | Building a more connected world.

Rev. 1.0  |  11

Содержание MGM13S Series






























































































































Отзывы:

Нет отзывов