manualshive.com logo in svg

Silicon Graphics Rackable C2108-TY10, Руководство пользователя

Поделиться
Скачать
Silicon Graphics Rackable C2108-TY10 Скачать руководство пользователя страница 79

Power Supply

007-5688-003

57

Power Supply Failure

If either of the two power supply modules fail, the other module will take the full load and allow 
the system to continue operation without interruption. The PWR Fail LED will illuminate and 
remain on until the failed unit has been replaced. The power supply units have a hot-swap 
capability, meaning you can replace the failed unit without powering down the system.

Removing/Replacing the Power Supply

You do not need to shut down the system to replace a power supply unit. The backup power supply 
module will keep the system up and running while you replace the failed hot-swap unit. Replace 
with the same model.

Removing the Power Supply

1.

First unplug the AC power cord from the failed power supply module.

2.

Depress the locking tab on the power supply module.

3.

Use the handle to pull it straight out with the rounded handle.

Installing a New Power Supply

1.

Replace the failed hot-swap unit with another identical power supply unit. 

2.

Push the new power supply unit into the power bay until you hear a click.

3.

Secure the locking tab on the unit.

4.

Finish by plugging the AC power cord back into the unit.

Содержание Rackable C2108-TY10



























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды