manualshive.com logo in svg

Silicon Graphics Rackable C2108-TY10, Руководство пользователя

Поделиться
Скачать
Silicon Graphics Rackable C2108-TY10 Скачать руководство пользователя страница 109

Advanced Setup Configurations

007-5688-003

87

This feature enables or disables startup delay. The options are Enabled and 

Disabled

. 

PEF Startup Delay 

Note:  

Available if the item-PEF Startup is enabled.

This sets the pre-determined time to delay PEF after system power-ups and resets. Refer to Table 
24.6 of the IPMI 1.5 Specification for more information at www.intel.com. The options are No 
Delay, 30 sec, 60 sec, 1.5 min, 2.0 min. 

Event Message for PEF Action 

Note:  

Available if the item-PEF Support is enabled.

This enables of disables Event Messages for PEF action. Refer to Table 24.6 of the IPMI 1.5 
Specification for more information at www.intel.com. The options are 

Disabled

 and Enabled. 

BMC Watch Dog Timer Action 

Allows the BMC to reset or power down the system if the operating system hangs or crashes. The 
options are Disabled, Reset System, Power Down, Power Cycle. 

BMC Watch Dog TimeOut [Min:Sec]

This option appears if BMC Watch Dog Timer Action (above) is enabled. This is a timed delay in 
minutes or seconds, before a system power down or reset after an operating system failure is 
detected. The options are 

[5 Min],

 [1 Min], [30 Sec], and [10 Sec]. 

DMI Event Log 

View Event Log 

Use this option to view the System Event Log. 

Содержание Rackable C2108-TY10



























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды