Silicon Graphics Rackable C2108-TY10 Скачать руководство пользователя страница 115

Страница: 115 / 122

Exit Options

007-5688-003

Discard Changes

Select this option and press

<Enter>

to discard all the changes and return to the AMI BIOS

Utility Program.

Load Optimal Defaults

To set this feature, select Load Optimal Defaults from the Exit menu and press

<Enter>

. Then,

select OK to allow the AMI BIOS to automatically load Optimal Defaults to the BIOS Settings.
The Optimal settings are designed for maximum system performance, but may not work best for
all computer applications.

Load Fail-Safe Defaults

To set this feature, select Load Fail-Safe Defaults from the Exit menu and press

<Enter>

. The

Fail-Safe settings are designed for maximum system stability, but not for maximum performance.

Содержание Rackable C2108-TY10



























































































































Результаты поиска

Содержание Rackable C2108-TY10

Отзывы:

Бренды по названию

Популярные бренды

Silicon Graphics Rackable C2108-TY10, Руководство пользователя

Результаты поиска

Содержание Rackable C2108-TY10

Отзывы:

Бренды по названию

Популярные бренды