Silicon Graphics Origin 300, Руководство пользователя

Страница: 239 / 264

L2 Controller Command Set
007-4498-002 213
137.38.82.55 L0000123 perch 009 1.7.7
137.38.82.158 L0000018 shrimp 018 1.7.7
137.38.82.50 N0000001 sn2-dbg2 022 1.7.7
137.38.82.52 M0000114 snapper 015 1.7.7
137.38.82.157 L0000119 whale 008 1.7.7
log
The following
log
set of commands displays the contents of the log, resets the log, and
writes an entry into the log.
•
log
•
log reset
•
log
<entry>
Use the
log
command to view the contents of the log. If the log is empty, the output from
the
log
command is
log is empty
.
Use
log reset
to empty the log. Use
log
<entry> to write a line in the log. The variable
<entry> is text to enter in the log. Example C-52 shows sample output from the
log
Start the Test
command.
Example C-52
log Start the Test
Command Output
L2>log Start the Test
log entry made.
loopback
Use the
r
<rack>
s
<slot>
loopback
<bytes> <count> command to test the L2-to-L1
connection. In this command, the variable <rack> is a rack number, the variable <slot> is
a slot number, the variable <bytes> is the number of bytes to send, and the variable
<count> is the number of times to run the test.
Note: For these commands, the words
rack
and
slot
may replace the mnemonics
r
and
s
.