manualshive.com logo in svg

Silicon Graphics Origin 300, Руководство пользователя

Поделиться
Скачать
Silicon Graphics Origin 300 Скачать руководство пользователя страница 156

130

007-4498-002

A: Technical Specifications

Front Components

The AC- and DC-powered NUMAlink modules contain the following front-panel items
(refer to Figure A-9):

•

L1 display

is a 2-line by 12-character liquid crystal display (LCD) that displays

status and error messages that the L1 controller generates.

•

On/Off button with LED

enables you to manually power on and power off the

module.

•

L1 controller LEDs

function as follows:

–

On/Off button LED

 illuminates green when the internal components are

powered on.

–

Service required LED

 illuminates orange to indicate that an item is not

functioning properly (for example, a fan is off), but the NUMAlink module is
still operating.

–

Failure LED

 illuminates red to indicate that a failure has occurred and the

NUMAlink module is down.

•

Fans

that provide N+1 redundant cooling for the module.

Note:

The front of the NUMAlink module appears to display three cooling fans;

however, only the middle and right fans are present.

Содержание Origin 300









































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды