Silicon Graphics InfiniteStorage 6120 Скачать руководство пользователя | Manualshive

Страница: 89 / 94

background image

007-5533-001

79

B

Safety Requirements for Rack Installation

The following safety requirements must be considered when the InfiniteStorage 6120 is mounted in
a rack.

The rack when configured with the units must meet the safety requirements of UL 60950 and IEC
60950.

Mechanical Loading

• The mounting of the system must conform to even and safe mechanical loading. Uneven

mechanical loading could cause a rack to tip and fall.

• The rack construction must be capable of supporting the total weight of the installed

enclosure(s) and the design should incorporate stabilizing features suitable to prevent the rack
from tipping or being pushed over during installation or in normal use.

• When loading a rack with the units, fill the rack from the bottom up and empty from the top

down.

• Always remove all modules and drives, to minimize weight, before loading the chassis into a

rack.

WARNING : It is recommended that you do not slide more than one enclosure out
of the rack at a time, to avoid danger of the rack tipping over.

• When mounting in a rack, ensure that the enclosure is pushed fully back into the rack.

• The system must be operated with low pressure rear exhaust installation. (The back pressure

created by rack doors and obstacles should not exceed 5 pascals [0.5mm water gauge].)

Circuit Overloading

The rack should have a safe electrical distribution system. It must provide over current protection for
the unit and must not be overloaded by the total number of units installed in the rack. Consideration
of the units nameplate rating should be used when addressing these concerns.

Reliable Earthing

• The electrical distribution system must provide a reliable earth ground for each unit and the

rack.

• Each power supply in each unit has an earth leakage current of 1.5mA. The design of the

electrical distribution system must take into consideration the total earth leakage current from
all the power supplies in all the units. The rack will require labelling with

HIGH LEAKAGE

CURRENT. Earth connection essential before connecting supply

.

«
...
87
88
89
90
91
...
»

Содержание InfiniteStorage 6120































































































Отзывы:

Нет отзывов

Похожие инструкции для InfiniteStorage 6120

Бренд: Navigloo Страницы: 28

Бренд: Seagate Страницы: 28

Бренд: Hama Страницы: 8

SmartStore SM2015

Бренд: Riverlea Страницы: 16

Rugged USB3 Thunderbolt™ Series

Бренд: LaCie Страницы: 29

Бренд: U-Line Страницы: 9

Бренд: Rocstor Страницы: 4

Бренд: Quantum Страницы: 2

Storage 6180 Array

Бренд: Oracle Страницы: 6

StorageTek SL3000

Бренд: Oracle Страницы: 216

Pillar Axiom 600

Бренд: Oracle Страницы: 229

Бренд: Argus Страницы: 24

Бренд: GRE Страницы: 24

Бренд: Lifetime Страницы: 40

Deskstar T7K500

Бренд: Hitachi Страницы: 2

DKC-F710I-1R6FM

Бренд: Hitachi Страницы: 3

Бренд: Hitachi Страницы: 6

Бренд: Hitachi Страницы: 1

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды