Silicon Graphics InfiniteStorage 6120 Скачать руководство пользователя | Manualshive

Страница: 3 / 94

background image

P r e f a c e

0 0 7 - 5 5 3 3 - 0 0 1

iii

Preface

What is in this guide

This user guide gives you step-by-step instructions on how to install, configure and connect the
SGI InfiniteStorage 6120 system to your host computer and how to use and maintain the system.

International Standards

The InfiniteStorage 6120 complies with the requirements of the following agencies and standards:

• CE

• UL

Potential for Radio Frequency Interference

USA Federal Communications Commission (FCC)

This equipment has been tested and found to comply with the limits for a class A digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.

Properly shielded and grounded cables and connectors must be used in order to meet FCC emission
limits. The supplier is not responsible for any radio or television interference caused by using other
than recommended cables and connectors or by unauthorized changes or modifications to this
equipment. Unauthorized changes or modifications could void the user’s authority to operate the
equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.

European Regulations

This equipment complies with European Regulations EN 55022 Class A: Limits and Methods of
Measurement of Radio Disturbance Characteristics of Information Technology Equipments and
EN50082-1: Generic Immunity.

Safe Handling

• Remove drives to minimize weight.

• Do not try to lift the enclosure by yourself.

• Do not lift the InfiniteStorage 6120 by the handles on the power cooling module (PCM); they are

not designed to support the weight of the enclosure.

«
1
2
3
4
5
...
»

Содержание InfiniteStorage 6120































































































Отзывы:

Нет отзывов

Похожие инструкции для InfiniteStorage 6120

Бренд: DANE-ELEC Страницы: 2

2.5” Solid State Drive

Бренд: YearGoo Страницы: 6

ApplianceStor 15MT

Бренд: Rasilient Страницы: 30

Mobile Wi-Fi Pocket Drive

Бренд: Macally Страницы: 71

Бренд: garofalo Страницы: 12

EXOS ENTERPRISE ST10000NM001G

Бренд: Seagate Страницы: 56

Бренд: Lifetime Страницы: 20

Бренд: INTILION Страницы: 121

Бренд: Oracle Страницы: 268

Бренд: Argus Страницы: 1

Memorator Pro 5xHS

Бренд: Kvaser Страницы: 27

PowerProtect X400

Бренд: Dell EMC Страницы: 42

Бренд: Promise Technology Страницы: 25

Бренд: Promise Technology Страницы: 284

Бренд: Husky Страницы: 4

Бренд: Freecom Страницы: 2

Бренд: Palmako Страницы: 34

Бренд: Verbatim Страницы: 53

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды