manualshive.com logo in svg

Silicon Graphics Altix XE1300, Краткое руководство пользователя

Поделиться
Скачать
Silicon Graphics Altix XE1300 Скачать руководство пользователя страница 22

14

 007-4979-004

1: SGI Altix XE1300 Cluster Quick-reference

Ethernet Network Interface Card (NIC) Guidelines

While Ethernet ports are potentially variable in a cluster, the following rules generally apply to the 
cluster head node:

•

The server motherboard’s nic1 is always a public IP in the head node.

•

The server motherboard’s nic2 is always a private administrative network connection.

•

Nic3 is always a PCI expansion controller port. It is typically used to handle MPI traffic.

Cluster Management (Head Node) IP Addresses

The primary head node of the cluster (head node1) is also known as the cluster management head 
node. Head node 1 is where the cluster management software is installed and it has the following 
technical attributes:

•

On-board network interface (nic1) IP address is variable (used as public Ethernet access). 

Important:  

The on-board network interface 1 (nic1) IP address is the factory IP address 

setting. This setting needs to be changed to reflect the customer domain IP address before 
connection to the LAN. Refer to the section “Changing the NIC1 (Customer Domain) IP 
Address” on page 15.

•

On-board network interface 2 (nic2) (10.0.10.1) is always used as the management and 
administration (internal) network port on the primary head node of the cluster.

Note:  

In the case of a Gigabit Ethernet solution, nic3 is used for MPI traffic. In this case nic3 

is on a PCI expansion card.

•

The optional Infiniband HCA IP address is 192.168.10.1.

•

Board Management Control (BMC) static IP address. The Intelligent Platform Management 
Interface (IPMI) uses IP address 10.0.30.1 to make controller connections to the other BMCs 
that exists in the cluster.

It is possible to have additional head nodes on the cluster. Table 1-3 lists examples of the head 
node port IP address information for more than one head node. Baseboard Management Control 
routes through nic1 in any additional head nodes added to the cluster. Each fourth octet number in 
an address iterates by one number as a head node is added.

Содержание Altix XE1300



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды