manualshive.com logo in svg

Silicon Graphics Altix XE1300, Краткое руководство пользователя

Поделиться
Скачать
Silicon Graphics Altix XE1300 Скачать руководство пользователя страница 35

Related Publications

007-4979-004

27

•

SGI Altix® Systems Dual-Port Gigabit Ethernet Board User's Guide

, Publication Number 

007-4326-00

x

This guide describes the two versions of the optional SGI dual-port Gigabit Ethernet board, 
shows you how to connect the boards to an Ethernet network, and explains how to operate 
the boards. You can use the dual-port Gigabit Ethernet board to replace or supplement the 
built-in Ethernet network adapters in your system.

•

SGI 10-Gigabit Ethernet Network Adapter User's Guide

, Publication Number 007-4669-00

x

 

This guide describes the SGI 10-Gigabit (Gbit) Ethernet network adapter. It shows you how 
to connect the adapter to an Ethernet network and explains how to operate the adapter. The 
manual also provides information on how to performance tune this high-speed interface 
card. 

•

SGI ProPack 5 for Linux Start Here

, Publication Number 007-4837-00

x

 

This document provides information about the SGI ProPack 5 for Linux release, including 
the major features of the release, flowcharts of disk partitions and file configurations. 

•

Guide to Administration, Programming Environments, and Tools Available on SGI Altix XE 
Systems

, Publication Number 007-4901-00

x

.

For internet access to these SGI documents, see the SGI Technical Publications Library at: 
http://docs.sgi.com

Various formats are available. This library contains the most recent and most comprehensive set 
of online books, release notes, man pages, and other customer information.

Содержание Altix XE1300



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды