Silicon Graphics Altix XE1300 Скачать руководство пользователя страница 23

Страница: 23 / 66

Table 1-3

Head Node Ethernet Address Listings

Head node
number

Internal
management IP
address nic2

(GigEnet) MPI
NAS/SAN option
nic3

Infiniband IP
address

Baseboard
Management Control
or IPMI address nic1

10.0.10.1

172.16.10.1

192.168.10.1

10.0.30.1

10.0.10.2

172.16.10.2

192.168.10.2

10.0.30.2

10.0.10.3

172.16.10.3

192.168.10.3

10.0.30.3

10.0.10.4

172.16.10.4

192.168.10.4

10.0.30.4

Changing the NIC1 (Customer Domain) IP Address

007-4979-004

Changing the NIC1 (Customer Domain) IP Address

The “external” IP address assigned to NIC1 must be changed to reflect the new network
environment. In addition, a set of network parameters specific to your networking environment
need to be specified.

Note:

A README file covering this process is also available in:

/usr/local/Factory-Install/Scripts

1. Open the Scali manage GUI using the command

scalimanage-gui

2. Login with password:

sgisgi -

A Scali Manager screen appears.

3. Right click on the “IP Networks” icon and select “Create New Subnet”.

4. Enter the new subnet information and click the “Create New Subnet” box (lower right), then

click “OK” to confirm the change.

5. Open the “Independent Servers” tree by clicking on the left arrow. Right click on

Scalimanage headnode, then mouse over “Configure…” and select “System Settings”.

6. Right click on “Hostname” and change the content to reflect your network setup.

7. Under “Independent Servers”, Right click on the Scalimanage headnode, then mouse over

“Configure…” and select “Network”.

8. Click on the “Network Interfaces” tab, then make the following changes:

–

Click the “Interface Hostname” boxes for eth0, eth1, etc. and change the hostnames

Содержание Altix XE1300



































































Результаты поиска

Содержание Altix XE1300

Отзывы:

Бренды по названию

Популярные бренды

Silicon Graphics Altix XE1300, Краткое руководство пользователя

Результаты поиска

Содержание Altix XE1300

Отзывы:

Бренды по названию

Популярные бренды