Silex technology BR-500AC, Руководство пользователя

Страница: 29 / 128

3. Before You Begin
23
In this configuration method, only " SSID " and " Network Key " are needed to connect to a wireless LAN,
however, further configuration is required in the following cases.
- Access Point is operating in a stealth mode.
- Access Point is using the Shared authentication
- Access Point is using the Open authentication and the WEP key index other than "1".
- Too many wireless networks are active (up to 32 wireless networks can be shown by BR-500AC).
Easy Configuration Using Configuration Mode
In this configuration method, you connect the BR-500AC to a PC using a LAN cable to
configure the settings from the PC.
By connecting the BR-500AC to the PC and starting it in Configuration Mode, the Web
configuration interface can be accessed. Select the Access Point the BR-500AC should
wirelessly connect to and enter the Network Key on the configuration interface.
Depending on your environment, you may need to check the wireless LAN information
beforehand.
Configure directly from a PC
BR-500AC
LAN Cable
PC
Note