Silex technology BR-310AC, Руководство пользователя

Страница: 57 / 108

4. How to Configure BR-300AN
51
3.
The BR-310AC and the Access Point will start to communicate each other.
The wireless configuration is successfully completed when the WLAN LED turns Green
and the STATUS LED turns or blinks Green.
WLAN
STATUS
Confirm STATUS LED
turns or blinks Green
Confirm WLAN LED turns Green
BR-300AN
- It may take up to 2 min to finish the wireless configuration depending on your environment.
- If the wireless configuration failed, the WLAN LED will flash rapidly for 10 sec. In such a case, read the
TIP
at the beginning of
4-3. Configuration Using Smart Wireless Setup(Pin Code)
and try again.
- To change the PIN code, see Checking a PIN Code .
Note
If you plan to use the PC wirelessly (the one you have been using for this configuration),
restart the PC. To use the other non-wireless device wirelessly, turn off the BR-310AC
and the PC, and connect the BR-310AC to the non-wireless device using a network
cable.
For details, refer to
Connecting Non-wireless Devices
in the next page.