Silex technology BR-310AC, Руководство пользователя

Страница: 48 / 108

42
BR-310AC User's Guide
6.
The BR-310AC and the Access Point will start to communicate each other.
When the configuration finished successfully, the WLAN LED turns Green and the
STATUS LED turns or blinks Green.
WLAN
STATUS Confirm STATUS LED
turns or blinks Green
Confirm WLAN LED turns Green
BR-300AN
- It may take up to 2 min to finish the wireless configuration depending on your environment.
- If the wireless configuration is finished in failure, the WLAN LED will flash rapidly for 10 sec.
In such a case, read the instructions carefully and start from
4
again.
Note
If you plan to use BR-310AC in
Single Client Mode
, you can keep using the connected
non-wireless device to use it wirelessly.
To replace it with the other non-wireless device, turn off the BR-310AC and replace the
connected non-wireless device to it. See
Connecting Non-wireless Devices
in the
next page for how to connect the BR-310AC and non-wireless device using a network
cable.
To change the operating mode, start the BR-310AC in configuration mode. For details,
refer to
5-1. How to Access Web Configuration Interface
.