UNOCODE PRO
Operating manual - English
22
Copyright Silca 2017
Note: after placing the original key in the r/h clamp, remember
to lower the gauge. If this is not done, when reading starts the
machine will stop and show the following message on the
display:
In this case lower the gauge and press START to continue.
When reading is finished, to enter the adjustments, use the “up/
down” arrow keys over the fields (Depths and Spaces) in which
the adjustments are to be made:
• Press F1 to get positive values (+).
• Press F2 to get negative values (-).
• Press F3 to cancel the set adjustments.
Adjustments possible for Depth (-30 to +30 hundredths of
a millimetre):
-
One value (positive or negative) raises or lowers all cuts.
Adjustments possible for Spaces (-30 to +30 hundredths
of a millimetre):
-
One value (positive or negative) moves all the cuts (from the
stop) to the right or left.
Warning! The presence of this symbol indicates that adjustments to the card have been
applied!
F1
F2
F3
F4
