(c) 2016 SILCA S.p.A. - Vittorio Veneto
This manual is written by SILCA S.p.A.
All rights reserved. No part of this publication may be reproduced or used in any form or by any means (photocopying, microfilm or
other) without the written permission of SILCA S.p.A.
Edition: September 2017
Printed in Vittorio Veneto
by SILCA S.p.A.
via Podgora, 20 (Z.I.)
31029 VITTORIO VENETO (TV) - Italy
The Manufacturer declines any responsibility for possible inaccuracies in this document due to printing or transcription errors. The
Manufacturer reserves the right to alter the information without prior notice, except when they affect safety. This document or any of
its parts cannot be copied, altered or reproduced without written authorization from the Manufacturer. Keep the manual and look after
it for the entire life cycle of the machi-ne.
The information has been drawn up by the manufacturer in his own language (Italian) to provide users with the necessary indications
to use the key-cutting machine independently, economically and safely.
IMPORTANT NOTE:
in compliance with current regulations relating to industrial property, we hereby state that the trade-marks or
trade names mentioned in our documentation are the exclusive property of authorized manufacturers of locks and users.
Said trade-marks or trade names are nominated only for the purposes of information so that any lock for which our keys are made
can be rapidly identified.
