Silca UC 199, Руководство по эксплуатации

Страница: 68 / 107

The cuts illustrated on the right cannot coexist. With regard to the cut
that originated the message<NON-FEASIBLE COMBINATION> it can
be seenthat between the two deep cuts (8) and the constantangle
(100°) the intermediate cut (0) would beremoved.
This happens when the cutting angle N (Normal) is notmade variable
by means of the type of cut L (Laser), parameter that can be selected
from a PC program.
Fig. 70
The new drawing of the key shows how for the samecutting process
(80846) the cutting angles areautomatically calculated by the
conjunction of thecutting base with a straight line.
This aspect, admissible with certain car keys, is morecommonly known
as ‘the ideal cutting line’.
ATTENTION: in this example it can be seen that the ßangle is less
than 45°. This could cause seriousproblems with a lock, making
it difficult or impossibleto place the key into the cylinder or
remove it.
Fig. 71
10 - ACTIvATION TIME
If the UC199 key-cutting machine is used with the limited promotional version of the Silca Key Programs program
this particular “counter” function starts counting from the first transmission by SKP to UC199 (PC queue).
At the end of the promotional period, the key-cutting machine can no longer communicate with the program.
ELAPSED TIME FROM
FIRST ACTIVACTION
Days: ____
Operating Manual
UC199
Copyright Silca 2012
64