Quick Start Guide
ZB4006 · Date
02.11.2020 · Art.
No.
89914 · Mod.
status
56/19
SIKO GmbH
Weihermattenweg 2
79256 Buchenbach
www.siko-global.com
Phone
: + 49 7661 394-0
Fax
: + 49 7661 394-388
Service
ZB4006
Mounting tool for SGH50
For detailed documentation please refer under
http://www.siko-global.com/p/zb4006
General information
Prior to installation, including in hazard areas, read the Installation Instruc-
tion (download from the internet SGH50). It contains the safety instructions,
hints and technical data to be observed during installation. Subject to change
without notice.
Caution
In order to ensure reliable functioning of this product, take care to transport,
store, position and mount it appropriately. Exercise care when you operate and
maintain the device. Only properly qualified personnel is authorized to install
and operate this product.
Safety information
It is important for safety reasons that you read and understand the below
instructions before you install the system:
•
Installation, connection, commissioning and maintenance shall be done by
properly qualified personnel.
•
It is the responsibility of the customer to ensure that the personnel con-
cerned read and follow the instructions and directions of this Guide and of
the Installation Instruction.
•
It is the responsibility of the customer to ensure that the mounting tool is
used correctly.
•
Only personnel specifically trained by SIKO shall execute repair and mainte-
nance work.
Slot for SGH50 with ZB4006
•
Select length of the threaded rod M16
4
subject to the installation situa-
tion.
•
Hook rope nipple
1
from SGH50
3
in rope receptacle from ZB4006
2
.
•
Push ZB4006
2
onto SGH50
3
, according to the alignment
5
, until it
engages.
4
1
2
3
5
Forcing SGH50 into the cylinder
•
Follow the mounting sequence as per SGH50
2
mounting instructions.
•
Insert SGH50
2
with ZB4006
1
into the cylinder
4
cautiously place
it coaxially in snug fit and press it in. Make sure that the plug
3
with the
cable does not jam.
•
If necessary, secure SGH50 with lateral grub screw.
•
Pull ZB4006
1
out of the cylinder
4
rope nipple out of the receptacle and
fasten it in the piston.
4
2
1
3
