Siko MS100/1, Перевод оригинальной инструкции по установке, Страница: 20 / 24

MS100/1
Transport, Storage, Maintenance and Disposal English
MS100/1 · Date 27.04.2018 · Art. No. 82106 · Mod. status 118/18
20
• Magnetic sensor has not been aligned according to Fig. 7 .
7 Transport, Storage, Maintenance and Disposal
Transport and storage
Handle, transport and store the magnetic sensor with care. Pay attention
to the following points:
• Transport and / or store the magnetic sensor in the unopened origi-
nal packaging.
• Protect the magnetic sensor from harmful physical influences includ-
ing dust, heat and humidity.
• Do not damage connections through mechanical or thermal impact.
• Prior to installation inspect the magnetic sensor for transport dam-
ages. Do not install damaged magnetic sensors.
Maintenance
With correct installation according to chapter
4
the magnetic sensor
requires no maintenance. Clean the surface of the magnetic tape with soft
cloth from time to time if it is very dirty.
Disposal
The magnetic sensor's electronic components contain materials that are
harmful for the environment and are carriers of recyclable materials at the
same time. Therefore, the magnetic sensor must be recycled after it has
been taken out of operation ultimately. Observe the environment protec-
tion guidelines of your country.
8 Technical data
Mechanical data Additional information
Housing aluminum blue L design
aluminum uncoated, barrel-
finished
B-TR design
Sensor/band reading dis-
tance
≤0.4 mm
Cable sheath PUR, PVC 6-wire ø5.1
-0.2
mm