Siko MS100/1, Перевод оригинальной инструкции по установке, Страница: 17 / 24

MS100/1
Installation English
MS100/1 · Date 27.04.2018 · Art. No. 82106 · Mod. status 118/18
17






Fig. 1: Mounting of the magnetic tape
Mounting examples
The simple mounting procedure by means of a beveled magnetic tape as
shown in
Fig. 2
can only be recommended for very protected environ-
ments. In a non-protected environment there is the danger of peeling off.
Mounting approaches as shown in Fig. 3 and Fig. 4 are more suitable in
such cases.
Optimum protection is provided by mounting in a groove as shown in Fig.
5 . The groove should be deep enough so that the complete magnetic tape
will be embedded in it.
Fig. 2: Magnetic tape
beveled Fig. 3: Magnetic tape screwed
on the front
Fig. 4: Magnetic tape screwed
from top Fig. 5: Magnetic tape in groove
4.3 Mounting the magnetic sensor
Alignment of the magnetic sensor
` Take care that the magnetic sensor is aligned correctly in order to
ensure optimum sensing (see Fig. 6 ).
1. Mount magnetic tape (see chapter 4.2 ).
NOTICE