IF09I/1
Datum 03.09.2008
Art.Nr. 80931
Änd. Stand 324/08
11
Direction of rotation:
Default setting:
0
(ascending code for
clock-
wise
direction of rotation)
Value range:
0
... ascending code
for
clockwi-
se
direction of rotation.
1
... ascending code
for
counter-clockwise
direction
of
rotation.
Calibration value:
The connected encoder is set to this value if in
the process data word Bit 30 was set to 1 by the
Interbus master.
Default setting:
0
Value range:
-2
23
... +2
23
- 1
Comma position:
Default setting:
0
, (Comma at the 1st digit in
the AP09 display)
Value range:
0 ... 3
(0 : XXXXX.
1 : XXXX.X
2 : XXX.XX
3 : XX.XXX)
Resetting the AP09/1:
All parameters are reset to their default values,
i.e.
APU = 0; Standard resolution 600 steps/revolu-
tion
Direction of rotation = 0; ascending code when
clockwise
Calibration value = 0; decimal place right justified
on the AP09 display
The manual of the ENCOM profile K3 contains a de-
tailed description of this profile. The manual can
be ordered from the PHOENIX CONTACT company,
Blomberg.