Siko AP10S, Руководство пользователя, Страница: 37 / 44

IO-Link
AP10S
Date: 12.05.2020 Art. No. 90304 Mod. status 110/20 Page 37 of 44
5.1.1 Process data in Absolute position operating mode
Sub-index Significance
(Absolute Position operating mode)
Bit offset Octet Length
In Out
1 PositionValue TargetValue 0 4 … 7 32
2 Reserved Reserved 32 2 … 3 16
3 … 18 ControlWord StatusWord 48 0 … 1 16
Table 20: Process data definition
5.1.1.1 Process data output (master  device)
Sub-
index Name Bit
offset Bit
length Data
type Comment
1 TargetValue 0 32 Signed-
Integer Absolute target value
2 Reserved 32 16 - Used in DisplayMode
3 bc00_CalibrationExecute 48 1 Bool If true calibration
becomes executed
4 bc01_Reserved 49 1 Bool
5 bc02_Reserved 50 1 Bool Used in DisplayMode
6 bc03_DisplayRange 51 1 Bool If true display range is
extended
7 bc04_GuardingBit 52 1 Bool Communication guarding
8 bc05_ErrorAck 53 1 Bool If true the actual error is
acknowledged
9 bc06_Reserved 54 1 Bool Used in DisplayMode
10 bc07_Reserved 55 1 Bool Used in DisplayMode
11 bc08_Reserved 56 1 Bool Used in DisplayMode
12 bc09_TargetValueActive 57 1 Bool If true TargetValue is
active
13 bc10_Reserved 58 1 Bool
14 bc11_Led1Green 59 1 Bool If true LED is on. Function
controlled via Parameter
LEDMode
15 bc12_Led1Red 60 1 Bool see bc11
16 bc13_Led2Green 61 1 Bool see bc11
17 bc14_Led2Red 62 1 Bool see bc11
18 bc15_LedBlinking 63 1 Bool If true LEDs are blinking
when on
Table 21: Process data output in Absolute position operating mode