Siko AH36M Скачать руководство пользователя страница 14

AH36M

Documentation English

AH36M · Date 

05.03.2018 · Art. 

No. 

85966 · Mod. 

status 

1/18

14

1  Documentation

The following documents describe this product:

• 

The data sheet describes the technical data, the dimensions, the pin 

assignments, the accessories and the order key.

• 

The mounting instructions describe the mechanical and electrical 

installation including all safety-relevant requirements and the associ-

ated technical specifications.

These documents can also be downloaded at "

http://www.siko-global.

com/p/ah36m

".

2  Safety information

2.1  Intended use

The absolute encoder AH36M is a high-precision measuring instrument. It 

serves exclusively for capturing absolute positions and revolutions, pro-

cessing the measured values and providing them as electrical output sig-

nals to the downstream device. Use the absolute encoder exclusively for 

this purpose.
1.  Observe all safety instructions contained herein.
2.  Arbitrary modifications and changes to this absolute encoder are for-

bidden.

3.  Observe the prescribed operating and installation conditions.
4.  Operate the absolute encoder exclusively within the scope of technical 

data and the specified limits (see chapter 

8

).

2.2  Identification of dangers and notes

Safety notes consist of the signal symbol and a signal word.

Danger classes

Immediate danger that may cause irreversible bodily harm resulting in 

death, property damage or unplanned device reactions if you disregard 

the instructions given.

Danger that may cause serious bodily harm, property damage or 

unplanned device reactions if you disregard the instructions given.

Danger that may cause minor injury, property damage or unplanned device 

reactions if you disregard the instructions given.

DANGER

WARNING

CAUTION

Содержание AH36M

























Отзывы: