EH-5500FD Installation Manual
Page 44
Mute remote transmitter first to avoid interference with the loopback operation.
Loopback is done with MAC addresses swap.
Refer to the
Diagnostics
chapter of the
EtherHaul Operation, Administration and
Maintenance Manual
for detailed detailed description of the system’s loopbacks.
Mute – checkbox to mute the transmitter with timeout in seconds. When
muted, the ODU will not transmit.
3.5.4
Modulation Table
Figure 3-12 Radio Page: Modulation Table
The modulation table presents the available modulation profiles. The radio can be
configured only to one of the profiles available in the table.
CINR Low – Lower threshold for stepping down in modulation profile (Adaptive
Mode).
CINR High – Upper threshold for stepping up in modulation profile (Adaptive
Mode).
Note that different modulation tables may apply according to product used, the
frequency channel used and ARQ status.
The modulation profiles and thresholds are optimized and should not be modified
(can be configured via CLI only after consulting Siklu support).
3.5.5
Statistics
Radio link’s performance can be monitored using the advanced statistics counters.
Refer to the
Statistics
chapter of the
EtherHaul Operation, Administration and
Maintenance Manual
for detailed description of the system’s statistics.
3.6
Default Bridge Configuration
The radio will allow, out-of-the-box, over the air transparent connection to the user
traffic over Eth2 (10G SFP+). This is a Layer 1 connection therefore carried transparently
over the link.
