EH-5500FD Installation Manual
Page 40
o
R/O field indicating the current speed/duplex (note that for SFP+ port, only
10G speed is available).
Click
Next
to continue or
Back
to return to previous section.
3.4.4
Quick Configuration: Step 4
– Network
Figure 3-8 Quick Config Page: Step 4
– Network
This section allows configuring the following parameters:
IP Address
The EtherHaul supports up to four IP addresses that can be associated with different
VLANs. IPv4 or IPv6 can be configured. IP addresses may also be acquired by DHCP.
o
# - Index (1-4)
o
Type – Static or DHCP
o
IP Address – Default is 192.168.0.1
o
IP Prefix Length – Default is 24 (equivalent to Mask of 255.255.255.0)
o
VLAN – 0 (not defined, meaning the IP is not associated with specific VLAN)
Click the Trash icon to clear an IP. Note you cannot clear the IP address you used to log
in to the system.
Default Gateway
SNMP Managers
