EH-5500FD Installation Manual
Page 34
3.2
Main Page
The Web-Based Management provides link view, presenting both local and remote
configuration and monitoring.
Although the local and remote systems IP address is identical (default IP address
192.168.0.1), the remote will be available as well as the EtherHaul uses dedicated
communication channel for local-remote communication that is not IP-based.
It is recommended, however, to assign dedicated IP address for local and remote
systems.
Note:
Depending on your station’s screen size and resolution, you may need to scroll the
screen vertically or horizontally in order to view all options for local + remote.
Alternatively, you may change the change the Internet’s Browser display distance
(Zoom out, using Ctrl+Minus).
The Web-Based Management Main page is a read-only page and displays the following
information:
Link Status – Link up or down (with visual indication)
Link Length [m] – link calculated distance between the local and remote systems
(air distance) based on propagation time.
Tx/Rx frequency [MHz]
RSSI [dBm] – Receiver Signal Strength Indicator. Current receive level.
CINR [dB] – Carrier to Interf Noise ratio. Indicates the current radio
link’s signal quality. In normal conditions, CINR≥23 indicates a good signal
quality.
Mode – Current operational mode of the link:
o
Alignment – Carrier Wave transmission. Used for antenna alignment. No
data over the radio link.
o
Static – Fixed modulation profile. If you select Static, you must select from a
list of pre–configured modulation profiles in the Modulation field.
o
Adaptive – Adaptive Bandwidth, Code, and Modulation. The system will
work on the highest modulation profile based on the CINR values of the both
sides and will present the current modulation profile.
Estimated Throughput [Mbps] – based on the current modulation profile.
o
For FDD systems – value is Full Duplex.
