SIKA UM RTD.2, Руководство по эксплуатации

Страница: 29 / 36

UM RTD.2 Parameter settings
Technical changes reserved - 29 -
5.3 “Preferences” setting
5.3.1 Filtering setting
In the event of noisy measurements, you can filter the latter to make the value displayed on the
screen more stable.
•
Access this menu using the F1 key (configuration menu).
•
Select the Setup field using the navigation keys (
↑
and
↓
), then confirm.
•
Select the Preferences field using the navigation keys (
↑
and
↓
), then confirm.
•
Select the Filtering field by pressing the F1 key.
Four filtering values are available
o
OFF
o
0.5s
o
1s
o
2s
•
Select these values using the navigation keys (
↑
and
↓
).
•
Confirm by pressing the VAL key.
5.3.2 Display resolution setting
In the
CONFIGURATION/SETUP/PREFERENCES menu, you can select the desired display resolu-
tion:
•
Access this menu using the F1 key.
•
Select the Setup field using the navigation keys (
↑
and
↓
), then confirm.
•
Select the Preferences field using the navigation keys (
↑
and
↓
), then confirm.
•
Select the Display resol. field by pressing the F1 key.
Three type of resolution are then available:
o
high (res=1mV or 1µA),
o
medium (res=10mV or 10µA)
o
low (res=100mV or 100µA).
•
Select this resolution using the navigation keys (
↑
and
↓
).
•
Confirm by pressing the VAL key.
5.3.3 Lighting duration setting
In the same menu ( CONFIGURATION/SETUP/PREFERENCE ), you can control the duration of the
lighting (manual, 10s or 1min). Press the ON/OFF key briefly to turn on the lighting for the selected
duration (10s or 1min). Press it again briefly to start the timing or to turn off the lighting in the case of
the
manual editing mode.
•
Access this menu using the F1 key.
•
Select the Setup field using the navigation keys (
↑
and
↓
), then confirm.
•
Select the Preferences field using the navigation keys (
↑
and
↓
), then confirm.
•
Select the Lighting field by pressing the F1 key.
•
Choose the manual or timed mode using the navigation keys (
↑
and
↓
).
•
Confirm by pressing the VAL key.