SIKA UM RTD.2, Руководство по эксплуатации

Страница: 20 / 36

Related Functions UM RTD.2
- 20 - © SIKA
•
Ba_UMRTD.2_en
•
01/2019
The
Configuration/Scaling/Define/Parameters menu makes it possible to define the format (Num-
ber of digits displayed) and unit.
Once the parameters have been set, the scaling is automatically enabled. To disable it, enter the
Configuration/Scaling ON menu, select OFF and confirm by pressing the VAL key.
4.2 Nulling (tare/offset)
The relative measurement function available on the device makes it possible to cancel a constant or
spurious value via programming.
When the relative measurement function is enabled, the symbol
is displayed on the measurement
screen.
The
NULLING/Define menu makes it possible to program the value of the Tare (positive or negative).
This value is obtained from the measurements:
Value Displayed = Value measured – Value of the Tare
Scaling pictogram
Pictogram of the
TARE mode