background image

 Appendix

63

Technical support

If a problem arises with this system, you should consult your 
dealer first for help. The system is likely to have been config-
ured by your dealer, making him the most appropriate choice 
when seeking technical advice. Your dealer may also be 
close enough to visit with the hardware for servicing or test-
ing.

Help resources:

1. See the TYAN website for FAQs, bulletins, driver updates 

and other information: http://www.tyan.com

2. Only contact TYAN after first speaking with your dealer
3. Check the TYAN user group: 

alt.comp.periphs.mainboard.TYAN

Returning merchandise for service

If any problems occur during the product’s warranty period, 
consult your system vendor or distributor before contacting 
TYAN. The warranty covers normal customer use of the 
product. The warranty does not cover damages sustained 
during shipping or failure due to alteration, misuse, abuse, or 
improper maintenance of the unit.

Note:  

A receipt or copy of your invoice, 

marked with the date of purchase, is required 
before any warranty service can be provided. 
You may obtain service by calling the manu-
facturer for a Return Merchandise Authoriza-
tion (RMA) number. The RMA number 
should be displayed prominently on the out-
side of the shipping carton, and the package 
should be mailed prepaid. TYAN will pay to 
have the product shipped back to you.

Transport GX21 (B5350) User’s Manual.

Содержание Transport GX21 B5350







































































Отзывы: