SIIG SC2475, Быстрое руководство по установке

Страница: 4 / 10

4
Windows 2000 Driver Installation
Windows 2000 will auto-detect and install the correct driver for the
Fast SCSI Pro controller. Insert Windows 2000 CD into your CD-
ROM drive when prompted.
Restart your system if prompted by Windows. Driver installation
is complete, the controller is now ready for device connection.
Windows NT 4.0 Driver Installation
The following instructions will guide you through the installation of
Windows NT driver for computer systems that boot from an IDE
drive or other SCSI host adapters.
1. Once a Windows NT session is established, perform the
following steps:
• Select “My Computer” from the Main Desktop.
• Select “Control Panel” from the My Computer group.
• Select “SCSI Adapters” from the Control Panel group.
2. Select the “Drivers” tab and click on “Add…”
3. From the Install Driver window, click “Have Disk...”.
4. Insert the Driver and Utility CD into your CD-ROM drive.
5. Type in the path: "D:\AP- 10_20\WINNT" and click "OK".
Select the driver name: "AdvanSys PCI SCSI Host Adapter"
and click "OK". Type in the path: "D:\AP-10_20\WINNT"
again and click "Continue..." to install the driver into your
Windows NT 4.0 system.
(Assuming D: is your CD-ROM drive).
6. Select "Yes" to re-start your system.
Windows NT 4.0 driver installation is complete. The controller is
now ready for device connection.
Driver Installation for MAC Systems
Anubis disk mounting and CD-ROM utilities are included to mount
the hard disks and the CD-ROMs.