SIIG SC2475, Быстрое руководство по установке

Страница: 3 / 10

3
2. Goto the folder "D:\AP-10_20\DOSWIN31" and copy all of the
files in that folder (except the "image" folder) onto a floppy
diskette.
3. Turn on your computer to boot to the DOS prompt.
4. Insert the floppy diskette you have just made into the floppy
drive.
5. At the a:> prompt, type:
install
and press <
Ente r
>.
6. Press <Enter> to continue and press <Enter> again to auto intall
the driver on your hard disk.
(“Automatic Installation” is the default setting for driver
installation and is highly recommended on most cases)
The driver installation is complete. Remove the diskette and follow
the screen instruction to reboot the system.
Windows 95 Driver Installation
Follow the procedures listed below to install Windows 95 drivers:
1. When Windows first restarts after installing the SCSI controller,
it will inform you that New Hardware Found. Insert the Drivers
and Utility
CD-ROM into the CD-ROM drive.
2. Click “Next” for Update Device Driver and click on the "Other
Locations
" button.
3. Type in the path: "D:\AP-10_20\WIN95" and press "Enter".
(Assuming D: is your CD-ROM drive).
4. Click “OK”, type in the installation path from Step 3 again
when prompted, click on “OK”, and “Finish”.
5. Select “YES” to restart your system.
Windows 95 driver installation complete, the controller is now
ready for device connection.
Windows 98/98SE Driver Installation
Windows 98 and 98 SE will auto-detect the controller and install the
correct driver automatically. Please insert your Windows 98 CD
into your CD-ROM drive when prompted.