6
◆
DO NOT drop or insert any foreign objects such as a clip, a pin, or a screw in the internal parts or
slot of the printer.
◆
DO NOT drop any liquid or spray a solvent to the printer.
◆
NEVER push the switch on the operation panel using sharp object such as pen tip.
◆
DO NOT use two or more thermal papers which are taped together.
◆
NEVER pull out the thermal paper when the thermal paper is set.
◆
Make sure not to injure your body or other objects by the plate edge.
◆
Unplug the DC plug or AC plug from an outlet when something goes wrong with the printer.
◆
NEVER disassemble the printer without a serviceman.
◆
Be careful not to get your fingers or hands caught in the printer when opening or closing the paper
cover.
◆
In order to ensure the function and the safety of the product, be sure to observe the installation
direction.
◆
DO NOT connect the RJ connector to a phone line. It should be used as the drawer kick connector.
◆
NEVER connect a USB cable to the RJ connector.
◆
As the plated sheet steel is used in the printer, the edge face might rust.
◆
When moving the printer from the installation site, hold the printer main body tightly with both hands,
then lift it upward slowly to leave the rubber feet from the installation surface. Lifting it rapidly or
moving it horizontally may peel the entire rubber feet, peel their surfaces, or damage the outer case.
Thermal Paper Handling
◆
Store the thermal paper in a cool, dry, and dark place.
◆
DO NOT rub the thermal paper with hard objects.
◆
DO NOT leave the thermal paper near organic solvents.
◆
DO NOT allow plastic film, erasers, or adhesive tape to touch the thermal paper for long periods.
◆
DO NOT stack the thermal paper with diazo copies immediately after copying.
◆
DO NOT use chemical glue.
◆
Always use the specified thermal paper. See "18 ACCESSORIES AND CONSUMABLE PARTS" for
details.
Precautions on Discarding
When discarding used printers, discard them according to the disposal regulations and rules of each
respective district.
