12
1 POWER Switch
The POWER Switch turns the printer on or off. The
LED lights when turning the power on. To turn the
power off, hold down the switch for longer than three
seconds.
2 FEED Switch
The FEED Switch feeds the thermal paper forward.
When holding down the switch for a few seconds,
the printer feeds the thermal paper continuously for
the period of held.
3 LED
The LED lights when turning the power on. See
"LED Display" on the next page for details.
4 Paper outlet
Thermal paper is ejected from here. The cutter is
attached.
5 Release lever
The lever is used to open the paper cover to set the
thermal paper. It is also used to open the paper
cover when a paper jam occurs.
6 Paper cover
The platen is released from the thermal paper when
opening this cover. Open this cover to replace the
thermal paper or to clean the thermal head.
7 Paper holder
The paper holder holds the thermal paper.
8 Thermal head
The thermal head prints data on the thermal paper.
NEVER touch the thermal head immediately after
printing because it gets hot.
9 Paper sensor
The sensor that detects thermal paper existence.
10 Platen
The platen brings the thermal paper into contact
with the thermal head. The platen is turned to feed
the paper.
11 Cutter
The cutter cuts the thermal paper automatically after
printing.
12 Power connector
The AC adapter is connected to here.
13 Interface connector
The interface cable is connected to here.
14 Drawer kick connector
The connector to connect the drawer.
Do not connect a phone line.
15 Wire clip
The communication cable can be fixed to prevent it
from being unplugged.
