-
19
-
Operation 2: DIP switch setting
(1) When the message shown at the right is printed, set the bits from the most
significant bit (bit 8) to the least significant bit (bit 1).
Input 8 bits. 1: Feed SW / 0: Power SW
To set 1: Press the FEED button.
To set 0: Press the POWER button.
For example, to set 10101110, press the buttons in the following sequence:
FEED, POWER, FEED, POWER, FEED, FEED, FEED, FEED, POWER.
(2) When the buttons are pressed eight times (for eight bits), the following
message is printed.
DIP SW-1=********” Save Setting? Yes: Feed SW / No: Power SW
When the FEED button is pressed, the message shown at the right is
printed, and the setting is saved.
DIP SW-1=******** Saved.
When you press the POWER button instead of the FEED button, the
message shown at the right is printed and the setting is not changed.
DIP SW-1 Not Changed.
After this operation, you can select the next DIP switch (operation 1).
After setting DIP switch 3, you can exit function setting mode (operation 3).
HINT
•
"********" in the message indicates the setting of the DIP switch. The
leftmost bit is the most significant bit (bit 8) and the rightmost bit is the
least significant bit (bit 1).
Operation 3: Exiting function setting mode
If you press the FEED button when the message shown at the right is printed,
you can return to operation (1) and set DIP switch 1 again.
DIP Switch setting mode. Continue: Feed SW / Quit: Power SW
If you press the POWER button, the message shown at the right is printed.
The printer leaves the function setting mode and turns off. The function
setting is now complete.
Setting Mode Finished.
HINT
•
You can confirm the settings by performing test printing after the
function setting.
