NOTE:
To remove the sonar sensor from the frozen ice,
gently tap sonar sensor at the base with your
hand. If it will not come loose, spray a small
amount of water on the ice surface around the
base and repeat above step until the sonar
sensor is easily removed.
Never use a blunt to strike the sonar sensor as
this may cause damage to the sensitive internal
electronics.
Cold weather is extremely hard on the electrical
components within the display housing.
It is suggested that you keep the unit in
temperatures above 0 degrees Fahrenheit
(-17 degrees Celsius) during operation.
Remove the batteries from the fish finder to
prevent battery leakage and corrosion.
Clean the sonar sensor and cable with fresh
water and dry-off before storing.
Do not submerge and/or spray the fish finder
screen/housing with water or use chemicals to
clean.
