Signode BXT3-13, Руководство по обслуживанию

Страница: 8 / 37

8 von 37 V 07.17
Service Manual BXT3-13/16/19 ENGLISH
2.4 Clean the tool
ATTENTION!
Do not use water or other solvent to clean.
See operating instructions, chap. 6.2.
2.5 Lubrication plan
Re-lubricate the device, see operating instructions (Manual), chap. 6.2 and 6.3.
Description Recommended lubricants Interval*
1 Drive train, planetary gear Klüber Microlube GBU-Y 131 80,000 cycles
2 Switchover gear ( Attention : exclusive free wheel!) Klüber Microlube GBU-Y 131 80,000 cycles
3 Freewheel ( Attention : no grease!) Universal oil, e.g. WD 40 80,000 cycles
4
Angular gear Klüber Microlube GBU-Y 131 80,000 cycles
5
Cam disk, resetting lever, coupling shaft Klüber Microlube GBU-Y 131 80,000 cycles
6
Tooth plate, threaded rod Klüberpaste 46 MR 401 80,000 cycles
7
All moving parts such as axles, joints, strap guides, etc. High-pressure resistant adhesive
lubricant oil, e.g. Würth HHS 2000
80,000 cycles
8
Ball guides on the welding shoe, eccentric shaft, knife
guide
High-pressure resistant adhesive
lubricant oil, e.g. Würth HHS 2000
25,000 cycles (see
manual, chap. 6.3)
* see also maintenance table 2.3.
!
8
7
7
8
6
5
1
7
7
2
5
3
5
5
4
4
3