AFTER SALES SUPPORT
1300 777 137
20
MODEL:
EA0944
PRODUCT CODE:
59080
12/2017
Operating Instructions (cont.)
6. Once the stations are found and saved, the display screen will indicate the frequency of the first
station playing, such as "FM 95.30".
7. To navigate through the saved stations, use the
+
button on the top control panel or the remote
control to the skip to the next preset station, and the
-
button to skip to the previous preset
station.
Manual Searching for FM Radio Stations
To manually search for FM radio stations, press (do not hold) the
or
button on the top control
panel or the remote control repeatedly. The FM tuner will search up or down the FM band by
0.05MHz increments for each press.
Hold the
button to semi scan to the next strongest radio frequency, let go when the display
screen reads 'SEARCH'. Hold the
button to semi scan to the previous strongest radio frequency,
let go when the display screen reads 'SEARCH'.
Bluetooth
®
Mode
The Smart DJ System features a Bluetooth
®
receiver which enables it to be wirelessly connected
to compatible Bluetooth
®
enabled devices such as smart phones and Bluetooth
®
enabled media
players. To pair the Smart DJ System with a compatible Bluetooth
®
enabled device, follow the steps
below.
1. Wake the Smart DJ Speaker from standby mode by pressing the button on the top control
panel or the remote control.
2. Slide the source control bar towards Source A (the left side of the Smart DJ Speaker).
3. Press the
M
button until the Bluetooth
®
mode indicator light illuminates blue and the display
screen reads 'BT', immediately followed by the word 'SEARCH' (which will be flashing). The
Smart DJ Speaker will now be discoverable to nearby Bluetooth
®
enabled devices.
4. On the Bluetooth
®
enabled device, activate (or turn ON) the Bluetooth
®
wireless connection and
search for nearby devices. When the device discovers "Signify Smart DJ", select and connect to
"Signify Smart DJ". The display screen will begin to flash 'SEARCH' until the device is connected.
This process should take a few seconds to connect – no PIN or passcode will be required.
NOTE:
If the antenna cable is not installed correctly, the auto-search function will not be able to
find any stations.
NOTE:
Please ensure the remote control is pointed to the front of the Smart DJ Speaker.
IMPORTANT:
If the last connected device is within the Bluetooth
®
reception range of the Smart
DJ Speaker, you will not be able to pair a new device to the Smart DJ Speaker. You will need to
turn off the Bluetooth
®
connection on the last connected device in order to connect a new device.