17
AFTER SALES SUPPORT
1300 777 137
MODEL:
EA0944
PRODUCT CODE:
59080
12/2017
Before First Use (cont.)
Attaching the Handles
Included with your Smart DJ Speaker is 1 x Allen key (Fig. 1) and 10 x screws (Fig. 2). Use these parts
to attach the handles (Fig. 3) to the main body of the Smart DJ Speaker by following the steps below.
Fig. 1
Fig. 2
Fig. 3
1. The side panel of the Smart DJ Speaker features four
holes. Align the holes on the handle to the holes on the
main body of the unit.
2. Using one hand to hold the handle to the main body of
the unit, simultaneously insert the screw through the
hole on the handle so that it also sits in the hole on the
main body of the unit.
3. While still holding the handle against the main body of
the unit, insert the Allen key into the screw and rotate
clockwise until the screw is secure and one corner of
the handle is attached to the main body of the unit.
4. Repeat steps 2-3 for the remaining three holes on the
main body of the unit.
5. Once one side is assembled and secure, attach the
handle to the other side panel, repeating steps 1- 4.
6. Upon completion you will have 2 x spare screws, please
store these safely aside in case you require them at a
later stage.
WARNING:
Keep batteries away from children. If you suspect a battery may have been
swallowed, seek immediate medical assistance.
WARNING:
Never try to heat, ignite, disassemble or throw the batteries into a fire.
IMPORTANT:
Ensure NOT to screw in the screw as tight
as possible, as this may damage both the handle and
the main body of the unit.
