AFTER SALES SUPPORT
1300 777 137
12
MODEL:
EA0944
PRODUCT CODE:
59080
12/2017
Product Overview (cont.)
Buttons and Controls
Power On/Off
Press the
POWER
switch (No. 2 on the rear panel parts list) to the ON position. After about 5 to
6 seconds, the display screen on the top control panel will illuminate and read 'PRESS STANDBY
BUTTON TO POWER ON', indicating that the Smart DJ Speaker is in standby mode.
To turn the Smart DJ Speaker off, press the
POWER
switch on the rear panel to the OFF position.
Unplug the power cord from the power outlet and carefully unplug the power cord from the Smart DJ
Speaker.
Standby Mode
Press the button (No. 18 on the control panel parts list, or No. 2 on the remote control parts list) to
wake the unit from standby mode. The Smart DJ Speaker will default into USB mode. Press again to
set the Smart DJ Speaker back into standby mode.
Source Control Bar
Adjusts the input balance between Source A and Source B. Slide
the source control bar to the left to emphasize the output of
Source A, and slide the source control bar to the left to emphasize
the output of Source B.
USB Input
Use the USB inputs to play tracks directly from a USB flash drive. To use the USB function,
insert a USB flash drive into either Source A or Source B and press the
M
button until
the respective USB mode indicator light illuminates blue. Ensure the source control bar is
adjusted to the correct source and press the button to begin playing compatible audio
files from the USB flash drive.
NOTE:
To disconnect the Smart DJ Speaker completely from power, you will need to switch off
the
POWER
switch on the back of the unit and then switch off the power at the outlet.
NOTE:
Only audio files in MP3 or WMA format can be played successfully on the Smart DJ
Speaker.
