Turning the Power On/Off
1. Plug the figure 8 connector into the AC power input located on the rear panel of the DJ Speaker.
Ensure it's been inserted fully before you insert the AC plug into a power outlet. Once the figure 8
connector is securely in place, switch the power outlet to the on position.
2. Press the
POWER
switch (No. 2 on the rear panel parts list) to the ON position. After about 5 to
6 seconds, the display screen on the top control panel will illuminate and read 'PRESS STANDBY
BUTTON TO POWER ON', indicating that the Smart DJ Speaker is in standby mode.
3. Press the button (No. 18 on the control panel parts list, or No. 2 on the remote control parts
list) to wake the unit from standby mode. The control panel on the top of the unit will illuminate
blue and the LED lights on the front of the speakers will illuminate as well. To turn off the LED
lights, press the
LED
button on the top control panel.
4. To turn off the Smart DJ Speaker, press the button on the top control panel to set the unit back
into standby mode, then press the
POWER
switch on the rear of the unit to the OFF position.
Unplug the power cord from the power outlet and carefully remove the power cord from the
Smart DJ Speaker.
Using the Audio Modes
The Smart DJ Speaker enables users to play two audio sources at the same time, so you can play
music, mix music sources and add DJ effects using the DJ auto/DJ effect features. You can also
play music from a variety of audio devices through the Smart DJ Speaker such as smart phones,
Bluetooth
®
enabled media players, USB flash drives and media players via the auxiliary inputs
on the back of the unit. You can also connect up to two wired microphones (not included) while
simultaneously playing tracks through the Smart DJ Speaker.
The Smart DJ Speaker has two sides that support different inputs independently or together. The
left side supports inputs and controls for Source A (Source A enables users to play USB, AUX,
Bluetooth
®
and FM radio mode). The right side supports inputs and controls for Source B (Source B
enables users to play USB or AUX).
To play the correct input source, slide the source control bar towards the required input source. For
example, if you have inserted a USB flash drive on the right side of the Smart DJ Speaker (Source
B), slide the source control bar to the right (Source B), or to listen in FM radio mode, slide the source
control bar to the left (Source A).
NOTE:
When powering on the Smart DJ Speaker, the initialization of the unit will require 5 to 6
seconds before it enters standby mode. This is normal.
NOTE:
To save power, the Smart DJ Speaker will automatically set itself into standby mode if the
audio has come to an end and no controls have been pressed within 15 minutes.
Press the button to wake the Smart DJ Speaker up from standby mode.
AFTER SALES SUPPORT
1300 777 137
18
MODEL:
EA0944
PRODUCT CODE:
59080
12/2017
Operating Instructions
