INTEGRITY VOICE ALARM ROUTING MATRIX
Integrity Voice Alarm Routing Matrix Installation & Maintenance Manual • Approved Doc. No. DCS0003214 Rev 0 (8/2/05) • Page 21
The other tabs on this page have the following functions
Slot Properties has the following facilities
Politeness Level – This facility is used to prevent a paging console with a higher priority
from interrupting a console with a lower priority.
For example, a console that has priority level 2 but politeness level 4 will not interrupt
units operating at politeness level 3 or 4. In effect, this allows a ‘first come first served’
facility to operate on multiple cards.
GPI address – normally left at 1, but if several Integrity systems are linked to one (set of)
Paging Consoles, the GPI address must be altered to suit.
E.g. Integrity System 1 = GPI Address 1; Integrity System 2 = GPI Address 2; Integrity
System 3 = GPI Address 3; Integrity System 4 = GPI Address 4.
Note that the Paging consoles must also have a unique address and that this is pro-
grammed into the console itself.
Number of Consoles
Set this to suit the maximum number of consoles on this GPI bus. The maximum is four,
whether there is one system or four systems.
Note that paging consoles can consume a relatively large amount of power when all the
LEDs are lit and so, as a general rule, one Integrity Mainframe can only supply the power
for one console. Auxiliary d.c. power and standby batteries are required for larger num-
bers of consoles.
Hardware Configuration
The Integrity Config screen allows the program to be uploaded to the Mainframe.
The main screen area has three sections, Differences, PC and Integrity.
The two red circles on the left show the progress of the upload, which takes place in the
following sequence: