INTEGRITY VOICE ALARM ROUTING MATRIX
Integrity Voice Alarm Routing Matrix Installation & Maintenance Manual • Approved Doc. No. DCS0003214 Rev 0 (8/2/05) • Page 20
In this case the GPI card is going to be used for a zonal paging microphone so the default
red microphone image should be changed. Left click on the red microphone image and
the Select Effect menu appears. Here you can select any suitable image, for instance a
green microphone.
You can then use the Panel Type radio buttons to choose the type of paging console you
will be using. The usual type is the MPC Series, which is a range of panels with between
16 and 64 programmable buttons.
On most Integrity systems, an alert and an evacuate message play at the same time in dif-
ferent zones. This cannot be done with one card so a second SVM card must be config-
ured. This time, select the Alert message as below. Note the Input Image changes to a yel-
low bell.
You have now created a basic six-zone voice alarm system matrix.
The GPI card
