Signamax 065-1063FSx series RS-232/422/485 to 100Base/FX Device Server / Media Converter
26
set idle -
(time in seconds)
–
set an automatic logout time for situations when either
the program or the communication link is idle
set xfer
- the command is used for RS-232 configuration and data communication
setting. The command syntax is as shown below:
set xfer [arg_1 data_1] [arg_2 data_2] ...
[arg_n data_n]
[Argument List]
Port........... Set TCP port number
statistics..... Clear statistics
upgrade
- Use this command to upgrade the firmware.
i.e. upgrade firmware xxx.xxx.xxx.xxx Soft2.bin
set snmp
- Use this command to set SNMP settings of the device server.
After each configuration session, be sure to set DIP switch 1 to the
‘OFF’ position. Otherwise, the unit will not transmit any data.
6.3
Web Graphic User Interface
Please see the previous chapter to log-in to the Device Server / Managed Media
Converter via the web browser interface.
6.3.1 System Information
System information will show the IP Address, Subnet Mask and Gateway settings.
After editing the setting, press
Apply
to implement the new settings.
6.3.2 Master Information
Master Info will show the hardware and firmware version.
