Signamax 065-1063FSx series RS-232/422/485 to 100Base/FX Device Server / Media Converter
11
4. Press
ENTER
and on the following screen, type the default username
admin,
leave the password field blank since there is no default value and press
ENTER
to
proceed.
5. Select either CLI User Interface or Menu-driven Interface option by using the
associated number key or using the
TAB
key and pressing
ENTER
. A relevant
Main Menu screen appears.
The Device Server / Managed Media Converter is preset with a factory IP address
(192.168.0.254) that must be configured to the user’s individual IP address. It is
important to do this so that the device server / managed media converter doesn’t
conflict with other devices with the same defaults.
NOTE:
Prior to following the instructions for HyperTerminal Configuration, ensure that a serial
cable connection between the device server / managed media converter and
workstation exists.
Type the following command line to change the device IP address in CLI mode where
xxx
’s represent values between
0
and
254
and the user should enter their own IP
address in this form.
a) set eth0 ip
xxx.xxx.xxx.xxx
