SIGNALCORE SC5317A Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 39

SIGNALCORE SC5317A Скачать руководство пользователя страница 9

Rev 1.1 | SC5317A & SC5318A

Hardware Manual

SignalCore, Inc.

8

SC5317A & SC5318A Hardware Manual

Table 1. Status LED Indicator

LED Color Description

Green The device is functioning properly in the state that it is programmed for.

Amber Indicates that all functions are on standby mode.

Red Indicates that one or more local oscillators are not functioning correctly.

Off No supply or supply error

Table 2. Active Indicator

LED Color Description

Green An external interface port has accessed the device.

Red Input supply voltage exceeded

Off No current interface access

Communication and Supply Connection

Figure 1. Power and Digital IO Connector

Power and communication to the SC5318A is provided through a a rectangular connector from Samtec
whose part number is TFM-115-01-L-D-RA. It also serves as the digital connector interface for RS232/SPI,
trigger, and other digital signals. A mating pig-tail cable, part number SFSD-15-28-H-10.00-SR, is provided
with the product. The pin definitions are listed in

Pinouts are different for different SignalCore products with the same connector type. Please ensure
that mating connectors and cables are wired correctly before connection.

Table 3. Interface connector pin out description

PIN # Description

22,24,26,28,30 12V Supply Rail

3,7,11,15,19,21,23,25,27,29 GND

13,14,16,17,19 Reserved, Do Not Connect

2  RX for RS232 or MISO for SPI (Host referred)
4  TX for RS232 or MOSI for SPI (Host referred)
5  SPI CLK
6  SPI CS_b
8  RS232 Baud Rate / SPI Mode Select
9  Device status

10 Device active

«
...
7
8
9
10
11
...
»

Содержание SC5317A








































Отзывы:

Нет отзывов