background image

 

-8- 

Operation 

GENERAL 

This unit is designed for easy operation 
under the stress associated with operating 
a motor vehicle.  All of the functions are 
located right on the hand-held controller 
and are easily accessible. 

 

POWER  

In order for the unit to function, the 
Rotary Thumbwheel On/Off/Volume 
switch must be in turned ON by rotating 
it counter-clockwise.  When turned on, 
the Rotary Thumbwheel can also be used 
to set the volume level of the PA.  

 

HORN (Air Horn) 

This momentary push-button switch provides a simulated air-horn tone while 
pressed.  This can be used to either replace, or to supplement the normal vehicle 
horn and is useful at intersections or in high noise areas.  This tone can be changed 
to an alternate “flatter” tone during installation.  (Refer to 

Installer Selectable 

Options 

section for jumper details).  The activation of the Air Horn may also be 

triggered by your Horn Ring switch through the Green wire.  (Refer to the 

Installer 

Selectable Options 

section for jumper settings and the

 Wiring Connections 

sections for details on hooking up the Green wire.) 

 

PA 

The attached noise-canceling microphone is used for public address operation when 
its push-to-talk button on the side is pressed.  You can set the PA volume to a level 
appropriate to the situation using the Rotary Thumbwheel. 

 

LIGHT CONTROL 

The red button on the side of the microphone can be used to activate a warning 
light.  Simply press the button to activate your light, and press it again to deactivate 
the light. 

 

RADIO REPEAT 

This optional function amplifies a radio input for re-broadcast outside the vehicle.  
Press the button to activate the radio Repeat, and press it again to deactivate it.  To 
use this feature, you must de-activate the Light Control feature. (Refer to 

Installer 

Selectable Options 

section for jumper details). 

 

LED INDICATORS 

There-are two LED indicators on the front of the 
control head (microphone).  The 

POWER

 indicator 

will light whenever the Rotary Thumbwheel is 
turned on.  The 

AUX

 indicator will light whenever 

you activate your external warning light or the Radio 
Repeat feature. 
 

Содержание LCS600













Отзывы: