-10-
PARTS
The following parts are available from Signal Vehicle Products:
Part
Description
S30235-17P
Siren Top Cover
P30234-17P
Siren Bottom Mounting Plate
SWH-75
Wiring Harness
P30069-38
Microphone Bracket with Screws
P30056-16
1/4-20 x 3/8" Hex Locking Bolt
P30028-6
15 Amp Automotive Fuse
P30028-16
2 Amp Automotive Fuse
P30028-1
20 Amp Automotive Fuse
LCS600-CH
Noise Canceling Microphone and Hand Held Control Head
P30147-44P
Mounting Bracket
P30052-30
Case Screws
If you have any questions concerning this or any other SVP product,
please contact our
Customer Service Department
at (585) 226-9025.
If a product must be returned for any reason, please contact our
Customer Service Department to obtain a Returned Goods Authorization
number (RGA#) before you ship the product to SVP. Please write the
RGA# clearly on the package near the mailing label.
SPECIFICATIONS
Input Voltage
10 - 16 VDC (negative ground)
Input Current
8.0 Amps @ 13.6 VDC (100W speaker)
Standby Current
Less than 150 mA
Audio Frequency
200Hz - 10 kHz + 3db
Audio Output
40 watts @13.6 VDC (100W speaker)
Output Power
105 WATTS RMS MAX. @ 15.0 VDC (100W speaker)
Air Horn Frequency
675Hz - 1633Hz (variable)
High Voltage Protection
16 - 18 VDC will cause siren output to cease, resumes at normal voltage
Short Circuit Current
30 AMPS (supply circuit must be capable of supplying this)
Operating Temperature
-15° F to +140°F
Controls
Rotary Thumb Wheel - On/Off/Volume
Momentary push-button Horn switch
Momentary push-button PA
Auxiliary input (jumper programmable) for positive or negative horn
Pushbutton Light Control or Radio Repeat
Connections
(12-Pin Connector)
Detachable, 12-pin, positive locking connector with pigtail leads.
Positive, Ignition Switched Positive, Negative, (2) Speaker, (2) Radio,
Auxiliary, Light Control Input and Output
Size
6" Wide, 6-1/2" Deep, 2" High
Shipping Weight
2.2 lbs.
